Google
 
Web CARS HOUSE

Home-Help with yj spring swap

Help with yj spring swap

So basically what I have going on is an 85 cj7 project. I am in the middle of doing a tub swap from a yj. When I get the tub pulled off of the 7 I plan on doing most of the mechanical work with the tub and fenders off.

I am going to swap the cj springs to yj springs to make it a little more street friendly.

The question, will a 4 inch yj lift be enough to clear 33" tires?
4 inches should cover it
No more... No less... Just right for 33's
Awesome, thats what I was looking to hear. Thanks for your help.
What's your plan for the front spring mounting? You do know the YJ springs will require you to move the front shackle hanger forward one bolt hole?.. Just asking.. :thumbsup:
Well my plan for the front spring mount was to either move it forward one hole, or possibly moving the shackle to the rear of the spring. I think that I read somewhere that you do not need to do a shackle reversal if you are going over 3.5 inches of lift. I plan on putting 4 inch lift springs on it.

Any input on doing the shackle reversal with 4 inch lift kit?

Thanks

Example Unordered List

electrical issue
Setting the distributor in
Fuel line information in F
flywheel ring gear...loose
at the cross roads
amc 360 dist. drive gear s
Where can I get manold bol
Heater Core Issues?
Where can I buy new rack a
Electrical Issues with my 

  • 上一carinfo:

  • 下一carinfo: