BMW Blog

here is my problem guys.
I replaced my harness with model # 10110 from painless wiring.
before I had everything but passenger side blinker. what I am thinking is my turn signal switch does not have integrated brake capability.
my question is how do you have yours hooked up. i have the
red/blk trace and pink for my brake switch.
the red with blk goes to the fuse block (12v) and the pink goes to my column.
not really my column but my turn light section of the harness. I took the pink and spliced it in to my r rear and l rear but it interferes with my blinkers.
if someone could help me figure out where I need to hook up the pink to make brake light+blinkers work I would be very thankfull.
if my sparton p/n (scs-3r6) does not have the brake light function I will end up getting a t-stat 901.
thanks.
The Sparton does interrupt the brake light, but your wires aren't like most I've seen, so can't tell you for sure which is which. But, yes, when you turn on the blinker, the switch will cut out power from the brake light, if that's what you're asking.
I guess to make it a little more simple because I know I confuse myself sometimes.

where do your stop light switch wires go? regardless of color.

mine are red/blk=fuse block (12v)
pink= ?

so what I really need to know is what wire on the sparton do I hook up the stop light switch to?
IE- right rear
left rear
pilot
power

thanks for your help.
Pilot is your flasher can.
Power should be brakes.

Does yours have a hazard?
hey i got another post with some pics of my stuff.

http://www.jeepforum.com/forum/showthread.php?t=517624&page=2

I do have hazards just on a seperate switch. it is a five prong.
and also I do have one left over wire from the sparton. it is red/blk.
when I hook the red/blk to the red/white it flashes all of my lights.
Figured it out.
I had now light bulbs up front and when I would hit the brakes it would light up the front. just didn't know it till I replaced the bulb.

thanks for everyones help.